Pull sound fixes from Takashi Iwai:
"A collection of various small fixes since the last PR. Most changes
are device-specific fixes, while there are a few fixes addressing the
issues reported recently by fuzzers.
Here are highlights:
ALSA Core:
- Prevent adding invalid kcontrols to the LED layer
- Workaround for a false-positive mutex lockdep warning in rawmidi
USB-audio:
- Relaxed the sticky mixer behavior check that caused regressions
- Fix an OOB write in Novation MIDI output
- Proper cleanup after system-resume errors
- Quirk updates for M-Audio Venom, Audient iD14 MkI, Logitech PRO X
Wireless, SMSL USB DAC, and Creative Sound Blaster Play! 3
HD-audio:
- Conexant headset plugin fixes
- Quirk additions and fixes for HP Laptop 15, Lenovo IdeaPad Slim 3,
TongFang XxAF5xxx, Lenovo Legion Pro 7, and Lenovo Yoga Pro 9
ASoC:
- DAPM: Fix off-by-one check on the second enum channel
- Tegra: Fix and sort register defaults
- AMD quirk updates for ASUS FA401EA, HP OmniBook X Flip 16,
HVY-WXX9/M1060, Alienware m18 R1, and MSI Thin A15 B7UC
- Fixes Qualcomm TDM handling
- Fix double put_device() on SoundWire
- Codec fixes for rt766, tac5xx2, rt712, tas2783, and max98926
Misc:
- Fix card leak on probe error on ice1712 driver
- Hardening for legacy aoa, mtpav and pcxhr drivers"
* tag 'sound-fix-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
ALSA: control: Don't add invalid kcontrols to LED layer
ASoC: amd: acp-config: change quirks to cover all ASUS FA401EA variants
ALSA: hda/conexant: Always enable the headset-mic pin on plugin
ASoC: dapm: Fix off-by-one check on the second enum channel
ASoC: amd: acp-config: force SoundWire probe on HP OmniBook X Flip 16
ASoC: amd: acp3x-es83xx: Add HVY-WXX9/M1060 DMI quirk
ASoC: amd: acp-config: Add HVY-WXX9/M1060 DMI quirk
ASoC: soc-generic-dmaengine: Fix DMA channel request warning
ALSA: rawmidi: Another workaround for false-positive mutex lockdep warning
ASoC: amd: yc: Add DMI entry for Alienware m18 R1 AMD
ASoC: amd: yc: Add DMI entry for MSI Thin A15 B7UC
ALSA: hda/realtek: Fix speaker mute LED for HP Laptop 15-fd0039nt
ALSA: usb-audio: Complete cleanup after system-resume errors
ALSA: hda/realtek: Add quirk for Lenovo IdeaPad Slim 3 15ABR8
ALSA: aoa: i2sbus: Check IRQ before requesting it
ALSA: usb-audio: Skip mixer creation on M-Audio Venom
ALSA: usb-audio: Skip reading sample rate on M-Audio Venom
ASoC: rt766: add RT766/RT767 VA1 device IDs
ALSA: hda/realtek: Add quirk for TongFang XxAF5xxx
ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()
...
Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.
One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.
Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.
Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
Pull I3C updates from Alexandre Belloni:
"A new driver this cycle, for the AMD AXI I3C controller.
There are also new features such as IBI wakeup support, SETAASA device
discovery and ACPI support for the the DAA methods, meaning we can now
communicate with the SPD devices on DDR5 modules.
New driver:
- AMD AXI I3C master controller
Subsystem:
- I3C Common Command Code (CCC) handling improvements, especially
around GET CCCs
- SETAASA device discovery support
- ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
well as I2C devices on I3C bus
- IBI-based wakeup support
Drivers:
- dw: SETAASA support
- mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
controller support, PIO queue management support for HCI v1.2
- renesas: improve suspend to RAM support, add runtime PM support"
* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
i3c: dw: reduce do_daa time if there's no client
i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
i3c: dw: rename "pclk" to "apb" to match dt-binding
i3c: dw: make struct dw_i3c_cmd smaller
i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
i3c: renesas: Don't register devices when ENTDAA times out
i3c: master: dw-i3c-master: fix OD timing for first broadcast
i3c: mipi-i3c-hci: Advertise IBI wakeup capability
i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
i3c: master: Reject IBI requests from non-IBI-capable devices
i3c: master: Add helper to query bus wakeup requirements
i3c: master: Report wakeup events for IBIs
i3c: master: Support IBI-based wakeup capability
i3c: master: Fix potential UAF in i3c_device_match()
i3c: master: Fix potential UAF in i3c_device_uevent()
i3c: Make dev->desc locking assumptions explicit
i3c: master: Fix use-after-free of master->this
...
* clk-pile: (111 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
...
* clk-microchip:
clk: at91: Read "reg" with helper
Pull sound updates from Takashi Iwai:
"It was a fairly busy development cycle - the changes spread over from
the core side to leaf drivers, with lots of cleanups and enhancements.
Here we go, some highlights:
ALSA core:
- Extension of ALSA control component list ABI
- Locking optimization and RCU conversion of ALSA sequencer core
- A few hardening fixes for UMP and sequencer core
- Drop __bitwise and __force prefix from UAPI definitions
ASoC:
- Automatic DAI format selection code deployment across many drivers
- Sorting of register default tables to prevent ordering issues in
many drivers
- Lots of code cleanups and refactoring
- Updates in Qualcomm driver stack
- New platforms: AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson
2K0300, Meson GX, Qualcomm LPI MI2S, SM8475, WSA855X, Realtek
RT1321 VA1/2 and RT766/7
HD-audio:
- Support for AW88399 HD-audio side codec for Lenovo Legion laptops
- Support for Hygon and Lisuan HDMI controllers
- Robustness fixes for wild device binding
- Lots of quirks/fixups: Realtek and Conexant codecs for ASUS,
Lenovo, Acer, etc
USB-audio:
- Support for Pioneer DJ DJM-S11
- Scarlett2/FCP private URB notification fixes
- Extended quirk_flags to 64bit
- Hardening fixes for 6fire, bcd2000, usx2y
- Device-specific quirks for Mackie, Valeton, SPACETOUCH
General:
- Auto-cleanup for put_device() and firmware loading across multiple
platforms"
* tag 'sound-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (791 commits)
ALSA: hda: Fix connection list comparison in proc output
ALSA: docs: fix dead link to Intel HD-audio spec
ALSA: usb-audio: Add delay quirk for SPACETOUCH USB Audio
ALSA: hda: Add Lisuan HDMI controller and codec support
ALSA: hda/realtek: Fix Lenovo Yoga Slim 7 14AKP10 quirk ordering
ALSA: hda/tas2781: Add hardware stabilization delay during firmware load retries
ALSA: hda/realtek: Fix mute LED for HP Victus 15-fa1xxx (MB 8C3F)
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A515-57
ASoC: tas2783-sdw: do not treat read-only Controls as writable
ASoC: SOF: validate topology volume range before allocation
ASoC: cs35l56: Use IRQ provided by the SoundWire core
soundwire: bus_type: Create IRQ mapping before calling driver probe()
ASoC: cs35l56: Move cs35l56_irq_request() after cs35l56_irq()
ASoC: cs35l56: Request IRQ in cs35l56_common_probe()
ALSA: core: Fix use-after-free in snd_card_do_free()
ALSA: hda/realtek: Drop duplicate quirk for Lenovo 0x17aa:0x38df
ALSA: usb-audio: Rename the Audient iD14 monitor mix volume control
ASoC: tas2781: Refactor calibration start kcontrol creation to separate helper
ASoC: dt-bindings: es8316: Fix supply property constraints
ALSA: seq: midi: Serialize input teardown with event_input
...
Pull regulator updates from Mark Brown:
"This is a relatively quiet release for the regulator API, we've had no
major core work and not really that much driver work either. There's a
bunch of activity, including several new devices, but nothing hugely
remarkable here.
- Reworking of the mode handling in the max14577 driver to fix issues
with collisions with enables
- Support for onsemi FAN53555BUC23X, Qualcomm IPQ9650, PM4125 VBUS
and PM8150B and Unisoc SC2730"
* tag 'regulator-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
regulator: fan53555: Add support for FAN53555BUC23X type
regulator: qcom-rpmh: Fix coding style issues
regulator: qcom-rpmh: readback voltage/bypass/mode set during bootup
regulator: qcom-rpmh: Fix PMIC5 BOB bypass mode handling
soc: qcom: rpmh: Add support to read back resource settings
regulator: dt-bindings: ti,pbias-omap: Convert to DT schema
regulator: ab8500: Remove stale expand_register kernel-doc entry
regulator: dt-bindings: Correct white-space style
regulator: pfuze100: add set_suspend_disable for LDO ops
regulator: core: use system_freezable_wq for init complete work
regulator: rt6245: Restore state on enable failure
regulator: tps65185: handle gpiod_get_value_cansleep() error returns
regulator: fan53555: Add support for mode operations on Silergy devices
regulator: dt-bindings: Add fan53555 allowed modes
regulator: wm831x-isink: remove conditional return with no effect
regulator: dt-bindings: Convert ltc3589.txt to yaml format
regulator: dt-bindings: tps51632: Convert to DT schema
regulator: mcp16502: Convert to dev_err_probe() in mcp16502_probe()
regulator: adp5055: Fix error code in adp5055_of_parse_cb()
regulator: qcom_usb_vbus: add support for qcom,pm4125-vbus-reg
...
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for A9 power domains
- bcm: Raise ASB poll timeout to 100us for bcm2835-power
- imx: Allow building power domain drivers as a modules
- mediatek:
- Add support for the MT6858 power domains
- Add support for the MT8196 HFRP DirectCTL power domains
- qcom:
- Add support for RPMh power domains for Maili
- Skip retention by default for rpmhpd
- renesas: Add support for R-Car X5H Module Controller
- rockchip: Add a regulator to the RK3568 NPU power domain
- tegra: Add support for multi-socket platforms
* tag 'pmdomain-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (24 commits)
pmdomain: renesas: Add R-Car X5H MDLC driver
dt-bindings: power: Document Renesas R-Car X5H Module Controller
pmdomain: amlogic: Add support for A9 power domains controller
dt-bindings: power: Add Amlogic A9 power domains
clk: imx: imx8qxp: add soft dependency on SCU power domain driver
pmdomain: imx: scu-pd: allow building as a module
of: export of_stdout symbol
pmdomain: imx8m{p,}-blk-ctrl: Add MODULE_DESCRIPTION
pmdomain: mediatek: Add support for MT6858 SoC
pmdomain: mediatek: Add support for secure modem power domain control
dt-bindings: power: Add MediaTek MT6858 power domain controller
pmdomain: rockchip: Add a regulator to the RK3568 NPU power domain
pmdomain: imx: Make IMX8M/IMX9 BLK_CTRL tristate
dt-bindings: power: qcom,rpmpd: document RPMh power domain for Maili
pmdomain: tegra: Add support for multi-socket platforms
pmdomain: bcm: bcm2835-power: Raise ASB poll timeout to 100us
pmdomain: mediatek: Add support for MT8196 HFRP DirectCTL domains
pmdomain: mediatek: Add support for Direct CTL simple power sequence
pmdomain: mediatek: Respect PD relationships during error cleanup
dt-bindings: power: mediatek: Add support for MT8196 direct HFRP
...
Georgi writes:
This pull request contains the following interconnect updates for
the 7.3-rc1 merge window:
- New driver for Maili SoC
- Add support for QoS on the SC8280XP SoC
- Add support for QoS on the x1e80100 SoC
- Add EPSS L3 scaling support for Shikra SoC
- Add COMPILE_TEST support for some platforms
- Misc tiny improvements and fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
interconnect: debugfs-client: add NULL check for platform_device_alloc
interconnect: qcom: simplify allocation
interconnect: qcom: add COMPILE_TEST
interconnect: qcom: add Maili interconnect provider driver
dt-bindings: interconnect: qcom: document the RPMh Network-On-Chip interconnect in Maili SoC
interconnect: qcom: Add EPSS L3 scaling support for Shikra SoC
dt-bindings: interconnect: qcom,osm-l3: Add EPSS L3 DT binding for Qualcomm Shikra SoC
interconnect: qcom: x1e80100: enable QoS configuration
dt-bindings: interconnect: qcom,x1e80100-rpmh: add clocks property to enable QoS
interconnect: qcom: sc8280xp: Enable QoS configuration
dt-bindings: interconnect: qcom,sc8280xp-rpmh: Add reg and clocks for QoS
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
Pull clk patches from Brian Masney:
- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.
Signed-off-by: Brian Masney <bmasney@redhat.com>
* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
arm64: tegra: Device tree changes for v7.3-rc1
This contains a new device tree for the Lenove ThinkEdge SE70 Edge
Client device as well as a number of fixes and cleanups for Tegra234 and
Tegra194. Tegra264 sees a number of additions to enable more features.
* tag 'tegra-for-7.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (1469 commits)
arm64: tegra: Correct Tegra234 p3740 interrupt flags
arm64: tegra: Correct Tegra234 p3737 interrupt flags
arm64: tegra: Correct Tegra194 p2972 interrupt flags
arm64: tegra: Drop CPU masks from GICv3 PPI interrupts
arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
arm64: tegra: Add pinctrl nodes for Tegra264
arm64: tegra: Fix CMDQV interrupt type on Tegra264
arm64: tegra: Properly sort devices on Tegra264
arm64: tegra: Add GTE nodes for Tegra264
arm64: tegra: Add Host1x and VIC on Tegra264
arm64: tegra: Populate CPU and L2 cache nodes on Tegra264
arm64: tegra: Enable GPCDMA in Tegra264 and add iommu-map
Linux 7.2-rc5
super: fix emergency thaw deadlock on frozen block devices
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tracing: Fix context switch counter truncation
...
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add the clock binding header and schema for the Rockchip RV1106 clock
and reset unit. The clock IDs are numbered continuously from 0, in the
same way as the RV1103B. The header also covers the MMC drive and
sample phase clocks, which the CRU provides using control registers in
the GRF region.
The RV1103 is a package variant of the RV1106 and uses the same CRU.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260729133609.3465563-2-sjg@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Richard Acayan <mailingradian@gmail.com> says:
This adds support for the SDM660 (formerly "SDM660 internal") sound card
and support for WCD codecs over internal MI2S (represented in APIs as
LPI MI2S).
Like on MSM8916 and MSM8953, some SDM660 and SDM670 devices connect to a
digital and analog codec. The connection to the digital codec is through
special "internal" MI2S ports. The digital and analog codecs are used on
the Xiaomi Redmi Note 7 for headset (playback + capture) and earpiece,
and also on the Google Pixel 3a for the headset.
This series does not include devicetree patches.
Link: https://patch.msgid.link/20260730174353.108023-1-mailingradian@gmail.com
Add a new clock ID, LPASS_HW_LPR_VOTE, to represent the LPASS low-power
resource (LPR) vote through the PRM interface.
The LPASS PRM supports a resource voting mechanism to control low-power
states via PARAM_ID_RSC_CPU_LPR. Exposing this as a q6prm clock ID allows
clients to request the LPR vote using the existing qcom,q6prm clock
provider interface.
This functionality is required on newer platforms (e.g. Hawi) where LPASS
clients need to explicitly manage LPR resource voting via PRM.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724141708.2212057-2-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Joy Zou <joy.zou@oss.nxp.com> says:
The regulator_init_complete_work fires ~30s after boot to disable
unused regulators via I2C. When this work races with PM suspend, the
I2C adapter may already be suspended, causing a -ESHUTDOWN warning
dump.
This series addresses the race and adds proper suspend power
management for unused LDO regulators.
Link: https://patch.msgid.link/20260731-b4-regulator-pf01-v2-0-a406c8737fdb@oss.nxp.com
Add the 'mipi-i3c-static-method' property mentioned in the MIPI I3C
Discovery and Configuration Specification [1] to specify which discovery
method an I3C device supports during bus initialization. The property is
a bitmap, where a bit value of 1 indicates support for that method, and 0
indicates lack of support.
Bit 0: SETDASA CCC (Direct)
Bit 1: SETAASA CCC (Broadcast)
Bit 2: Other CCC (vendor / standards extension)
All other bits are reserved.
It is specifically needed when an I3C device requires SETAASA for the
address assignment. SETDASA will be supported by default if this property
is absent, which means for now the property just serves as a flag to
enable SETAASA, but keep the property as a bitmap to align with the
specifications.
[1] https://www.mipi.org/mipi-disco-for-i3c-download
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://patch.msgid.link/20260728065955.809445-2-akhilrajeev@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add three new clock IDs to expose clocks introduced by the topology fix:
- CLK_MPMU_I2S_SYSCLK (51): the common i2s sysclk DDN at MPMU_ISCCR1
- CLK_MPMU_I2S_BCLK_FACTOR (52): the implicit /2 factor feeding i2s_bclk
- CLK_MPMU_I2S1_SYSCLK_SRC (53): the dedicated i2s1 sysclk source mux
CLK_MPMU_I2S1_SYSCLK keeps its existing ID (34) but will be repointed to
the real per-instance i2s1 clock in a subsequent patch. No in-tree user
references this ID so the semantic change is contained.
Fixes: efe897b557 ("dt-bindings: soc: spacemit: k3: add clock support")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260717-k3-clk-fix-i2s-v1-1-e95001a692ee@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Fairchild FAN53555 and its clone from Rockchip, Silergy and TCS support
two modes of operation:
- Auto-PFM: Allow automatic PFM during light load (default mode)
- Forced PWM
Some boards require forced PWM mode to keep the supply ripple within
acceptable limits under light load conditions.
Regulator mode indexes are starting from 1 to keep backward compatibility
with existing device trees
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Link: https://patch.msgid.link/20260723094001.120264-2-victor.krawiec@arturia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SCU1_CLK_PECI for the SoC1 PECI controller clock source, and
SCU1_CLK_HPLL_DIV4 which serves as one of the PECI clock mux parents.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The MFG (GPU) block on the MT8173 has a small glue layer, named MFG_TOP
in the datasheet, that contains clock gates, some power sequence signal
delays, and other unknown registers that get toggled when the GPU is
powered on.
The clock gates are exposed as clocks provided by a clock controller,
while the power sequencing bits are exposed as one singular power domain.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The Cix Sky1 Audio Subsystem (AUDSS) Clock and Reset Unit (CRU)
groups clock muxing, gating and block-level software reset control
in a single register block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Pull SoC fixes from Arnd Bergmann:
"There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX
platform and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers"
* tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
MAINTAINERS: Update maintainer and git tree for CIX SoC
ARM: Don't let ARMv5 platforms select USE_OF
MAINTAINERS: Update SpacemiT SoC git tree repository
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
arm64: tegra: Fix CPU1 node unit-address on Tegra264
arm64: tegra: Fix CPU compatible string to cortex-a78ae on Tegra234
MAINTAINERS: .mailmap: update Jens Wiklander's email address
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
arm64: tegra: Remove fallback compatible for GPCDMA
The Other Logic Blocks (OLB) found in Mobileye SoCs contain hardware
sub-functions grouped in a logical device.
The EyeQ7H features 14 such OLB. The main differences with the previous
generation of SoC are that some blocks have two clock sources instead
of one and that the clock source can be the one of the clock output of
another OLB instead of the main oscillator.
For the blocks with a single parent clock, the name of that clock is
"ref", similar to what is done for the OLB of the previous SoC. The
blocks with two parent clocks use either "ref" for the main oscillator,
"ref_100p0" for a 100MHz reference clock or "ref_106p6" for 106.6MHz
reference clock.
Some OLB also contain a reset controller with one or more reset domain,
like the blocks found in the EyeQ6H.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Linus Torvalds