Pull IRQ subsystem fixes from Ingo Molnar:
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch
(Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
* tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: Fix the unit of the hwspinlock timeout
Revert "irqchip/mbigen: Fix mbigen node address layout"
irqdomain: Delete irq_domain_add_linear()
Pull virtio console fix from Greg KH:
"Here is a single virtio console fix for 7.3-rc2 to fix a much reported
regression in 7.3-rc1, sorry about that. It's not been in linux-next,
but it has been sent by many different developers to resolve the issue
and is 'obviously' correct"
* tag 'tty-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
virtio_console: allocate the port_buffer with the caller's gfp
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes to resolve some reported bugs
that have been found, and tested, in a few staging drivers in 7.3-rc1.
Included in here are:
- OOB read problem fixes in the rtl8723bs driver
- fbtft driver fix
- sm750fb driver fix
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit()
staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr()
staging: fbtft: make dirty_lock IRQ-safe
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported problems and
regressions. Include in here are:
- xhci driver fixes
- cdns3 driver fixes
- usb gadget driver fixes for syzbot found problems
- typec driver fixes for broken hardware and other bugs found
- kernel data leaks in mdc800 driver
- usb storage driver fixes
- other small USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: qcom-pmic-typec: drain cc_debounce_dwork if port_start() fails
usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop
usb: gadget: fix null pointer dereference in usb_put_function_instance()
usb: typec: qcom-pmic: cancel reset_work on stop
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
usb: f_mass_storage: Bump local buffer size in fsg_common_create_luns()
usb: storage: realtek_cr: fix use-after-free on disconnect
usb: cdnsp: fix wakeup from S3 after controller context loss
usb-storage: ene_ub6250: fix race between scan work and probe
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
usb: gadget: f_midi: initialize work in f_midi_alloc()
usb: gadget: f_midi2: fix use-after-free in string attribute show path
usb: typec: tipd: Fix Thunderbolt altmode VDOs for cd321x
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
usb: typec: hd3ss3220: track VBUS enable state per consumer
usb: dwc3: clear forceRM when issuing EndTransfer
usb: dwc3: google: Initialise probe properties with DWC3_DEFAULT_PROPERTIES
usb: typec: mux: avoid duplicated mux switches
usb: typec: mux: Fix typec_switch_match()
usb: image: mdc800: change kmalloc() to kzalloc()
...
Pull kmalloc_obj conversions from Kees Cook:
"Another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules
in scripts/coccinelle/api/kmalloc_objs.cocci"
* tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: refresh kmalloc_obj() conversions
drm/amd/display: Fix harmless type mismatch in allocation
Pull driver core fixes from Danilo Krummrich:
- Fix kernfs listxattr() not returning security xattr names (e.g.
SELinux labels) when the kernfs node has no allocated kernfs_iattrs
- Fix silent truncation of IRQ vector indices in the Rust PCI
abstractions
- Don't select OF from DRIVER_PE_KUNIT_TEST; skip the test when OF is
disabled instead of silently enabling extra kernel functionality
- Russ Weight is retiring from kernel development; update the Firmware
Loader sysfs contact to the driver-core mailing list, add a CREDITS
entry for Firmware Upload, and update MAINTAINERS accordingly
* tag 'driver-core-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Remove Russ Weight from Firmware Loader
CREDITS: Add CREDITS entry for Firmware Upload
firmware_loader: Change contact for sysfs nodes
rust: pci: reject IRQ vector indices that do not fit in u32
kernfs: preserve security xattrs without allocating iattrs
drivers: base: test: DRIVER_PE_KUNIT_TEST should not select OF
Pull LoongArch fixes from Huacai Chen:
- Fix build errors when RUST and KASAN enabled
- fix a typo in comment of vmlinux.lds.S
- fix several bugs in Kprobes, BPF JIT and KVM support
* tag 'loongarch-fixes-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
perf build: Add clang and rust target flags for LoongArch
LoongArch: KVM: Fix TOCTOU race on pv_features
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY
LoongArch: KVM: Remove unused function kvm_arch_flush_remote_tlbs_memslot()
LoongArch: KVM: Fix resource leak in kvm_loongarch_env_init() error path
LoongArch: KVM: Add unregister helpers for the KVM interrupt devices
LoongArch: KVM: Free init resources if kvm_init() fails
LoongArch: BPF: Fix off-by-one error for insn_is_cast_user()
LoongArch: Avoid preempt count underflow without probe
LoongArch: Do not save/restore percpu base register in rethook trampoline
LoongArch: Remove unused setup_profiling_timer() function
LoongArch: Fix typo "avaliable" in comment of vmlinux.lds.S
LoongArch: Do not select HAVE_RUST when KASAN is enabled
put_chars() runs from the hvc console write path with preemption
disabled, so it asks alloc_buf() for GFP_ATOMIC. Only the data buffer
gets it: the struct port_buffer itself keeps the GFP_KERNEL default, so
the allocation can enter direct reclaim and sleep. A write to /dev/kmsg
on a CONFIG_DEBUG_ATOMIC_SLEEP kernel splats:
BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:320
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: virtme-ng-init
preempt_count: 1, expected: 0
Preemption disabled at:
[<ffffffff813fd90d>] vprintk_emit+0x17d/0x510
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
__might_resched+0x37a/0x4d0
__kmalloc_cache_noprof+0x94/0x5f0
put_chars+0x209/0x3e0
hvc_console_print+0x234/0x640
console_flush_all+0x4fc/0x950
console_unlock+0xbf/0x1b0
vprintk_emit+0x312/0x510
devkmsg_emit+0xba/0x110
devkmsg_write+0x21b/0x2e0
vfs_write+0x4dc/0x9d0
ksys_write+0x108/0x1e0
do_syscall_64+0xfa/0x460
</TASK>
Pass gfp on to that allocation too.
Fixes: fc220d6be3 ("virtio_console: refactor __send_to_port() buffer ownership")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Sungho Bae <baver.bae@lge.com>
Tested-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260810-serial-v1-1-abbe51602c13@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull btrfs fixes from David Sterba:
- preserve inode compression level when changing attributes
- fix lost wakeup when waiting for a zstd workspace
- fix bio context leaks after ordered extent processing errors
- in send, handle unexpected extents for non-regular inodes
- handle edge case in creation of reloc tree with enabled quotas
- in scrub report the exact failing offset, not the stripe base
- error handling fixes
- error code propagation in send, zoned mode and raid-stripe-tree
- restore active device pointer after seeding device addition error
- transaction abort fixups
- update Chris' email address
* tag 'for-7.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: update Chris Mason's email address
btrfs: tests: do not touch page cache if root/inode allocation failed
btrfs: zstd: fix lost wakeup when waiting for a workspace
btrfs: do not force reloc root creation during qgroup_account_snapshot()
btrfs: send: fix lost error return value in will_overwrite_ref()
btrfs: abort transaction before releasing tree_log_mutex on commit failure
btrfs: zoned: propagate do_zone_finish() error in btrfs_zone_finish_endio()
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
btrfs: send: reject extents for non-regular inodes
btrfs: return proper negative error code for update_raid_extent_item()
btrfs: fix the possible bioc_list memory leak during error
btrfs: fix transaction use-after-free in raid stripe insertion
btrfs: scrub: report the failing sector's address, not the stripe base
btrfs: preserve the compression property when other inode flags change
btrfs: restore active device pointers after failed sprout
btrfs: detach failed sprout device from transaction update list
btrfs: clean up target device if block group marking fails
Pull SCSI fixes from James Bottomley:
"Two enhancements to add support and MCQ for additional Intel 4.0
controller types.
The rest are all driver fixes, the largest of which is the mpi3mr
target use after free fix, follwed by a similar TOCTOU fix for
io_uring passthrough in bsg"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi: bsg: Cap io_uring sense copy to max_response_len
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
scsi: mpi3mr: Fix use-after-free on tgt_dev->starget during target device refresh/update
scsi: target: iscsi: Reserve a terminator byte for the login payload
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
scsi: ufs: ufs-pci: Add MCQ support for Intel UFS 4.0 controllers
scsi: ufs: ufs-pci: Add support for Intel UFS 4.0 HS-Gear5
scsi: sg: Report request-table problems when any status is set
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
scsi: ufs: ufs-qcom: Fix sequential read variance
scsi: ufs: ufs-qcom: Restore HS/LS link startup mode for Qualcomm UFS controller v6.2+
scsi: ibmvfc: Document protocol parameter of ibmvfc_alloc_target()
scsi: ibmvfc: Fix kernel-doc name for ibmvfc_scsi_relogin()
scsi: pm8001: Use rollback index when freeing MSI-X vectors
scsi: fnic: Initialize the NVMe local port info before registering
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- nvme-tcp fixes for an out-of-bounds write on an over-long PDU
- nvmet-tcp, nvmet-rdma and nvme-rdma leak and cleanup-ordering
fixes
- FDP placement id array racy access fix
- nvme-fc double free of fabrics options on nvme_add_ctrl()
failure, and a secret leak failure
- Fault injection opcode filtering
- stale namespace removal during scan
- Various other smaller fixes and cleanups
- Flag zoned disks with GENHD_FL_NO_PART
- Save the page offset gaps in a cloned bio
- Fix dma_alignment for large or unreported limits in loop and zloop
- Clear VM_MAYWRITE on a read-only ublk char device mmap
* tag 'block-7.3-20260905' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (25 commits)
nvme-tcp.h: drop kernel-doc comments, fix a few descriptions
nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails
nvmet: reject namespace enable without device path
nvmet-auth: Synchronize timeout work during SQ teardown
MAINTAINERS: update nvme entry
nvmet-tcp: reject unsolicited H2CData PDUs
nvme-tcp: defer TLS inline send to io_work
nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU
nvme-tcp: return -EPROTO for a C2HData on a write
nvmet: print namespace IDs as unsigned 32bit value
nvme: print namespace IDs as unsigned 32bit value
nvme: remove stale namespaces by NSID range during scan
nvme: add missing SRCU grace period in error path
nvme-fabrics: fix DHCHAP secret leak on parse failure
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
loop, zloop: fix dma_alignment for large or unreported limits
block: save page offset gaps in cloned bio
block: flag zoned disks with GENHD_FL_NO_PART
nvmet-rdma: fix queue leak when connect backlog is exceeded
nvme: add opcode filtering for fault injection
...
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
Pull IMA fixes from Mimi Zohar:
- Instantiating the ima_file_truncate and ima_path_truncate LSM hooks
resulted in configfs locking issues.
configfs files should not be measured, appraised, or audited in the
first place, so the builtin policies are updated to exclude them.
- IMA audit messages include the filename, which could result in a page
fault when the filename doesn't exist
- Un-hide the IMA_MEASURE_PCR_IDX Kconfig prompt
* tag 'integrity-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: allow users to specify the pcr index with IMA_MEASURE_PCR_IDX
ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()
ima: don't measure/appraise files on configfs
configfs: move CONFIGFS_MAGIC definition to magic.h
Pull drm fixes from Dave Airlie:
"Lots of scattered fixes: nouveau has a bunch of display fixes for
blackwell GPUs that should mean we light up monitors properly and fix
some desktop rendering problems, amdgpu and intel display changes as
usual.
There also changes to the core pagemap, then the usual amouny of AI
inspired validation fixes.
core:
- Fix drm_crtc_commit leak when PAGE_FLIP_EVENT is used
dma-buf:
- Publish the dma-buf only after copy_to_user succeeds
- fix some kernel-doc warnings
atomic-state-helpers:
- set pixel_blend_mode to prop default on reset
sysfb:
- Fix integer overflow
- fix constant comparison bug
pagemap:
- Prevent double migration of device pages
- Reset migration page count on eviction retry
- dma-unmap pages before handling migration errors
- use after free fixes
prime:
- fix prime exports tracing
amdgpu:
- Fix for drm_amdgpu_info_device with mixed 64 bit kernel and 32 bit
userspace
- plane blend mode fixes
- SR-IOV fix
- GFX8 fix
- MES queue reset fix
- GPUVM fixes
- DCN 6 warning fix
- DCN 3.5/3.6 fix
- DML fix
- Backlight fix
- Colorop fix
- DC get_estimated_bw() fix
- devcoredump fix
- Userq fixes
- APU PSP fix
- Cursor fix
amdkfd:
- MES queue eviction fix
- MQD debugfs fix
xe:
- oa uapi error handling fix
- drm info message to report FLAT_CSS base misalignment
i915:
- Drop an accidentally duplicated panel fitter call in DP MST
- Fix DDI clock programming for Cx0 and LT PHY
- Fix PTL CDCLK handling at probe, causing a glitch
- Fix dg2_power_well_count() return type
- Fix a NULL pointer deref at forced probe
- Fix selective fetch disable
amdxdna:
- out-of-bounds access fix
- reject commands chains with no commands
- handle chained mapping BO failures
- refuse to flush an imported BO
ethosu:
- handle mmio mapping failures
- handle storage modes only on hardware that supports it
- fix job completion fence cleanup
fastrpc:
- Publish the dma-buf only after copy_to_user succeeds
gud:
- Improve TV modes and rotation handling
nouveau:
- use-after-free fixes
- add missing scanline position support
- HDMI and DP fixes
- null pointer dereference fix
- dmem accounting fixes for large folios
- use write-combined maps for coherent
qaic:
- out-of-bounds access fix
tegra:
- Add blend mode properties
virtio:
- exit path and error handling fixes
* tag 'drm-fixes-2026-09-05' of https://gitlab.freedesktop.org/drm/kernel: (83 commits)
drm/xe/vram: report FLAT_CCS base misalignment
MAINTAINERS, mailmap: use Aditya Garg's linux.dev account
drm/amd/display: use plane color_mgmt_changed to track colorop changes
drm/amdgpu/userq: fix struct drm_amdgpu_info_device padding for 32bit compile
drm/amd/display: Fix cursor disable with horizontally split planes
drm/amdgpu/userq: dont overwrite the error of subsequent map call
drm/amdgpu: Skip accessing psp rum time db for APUs
drm/amdgpu: update the fw version for gfx12 userqueues
drm/amdgpu: update the fw version for gfx11 userqueues
drm/amdgpu: fix byte/dword unit mismatch in coredump IB dump
drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds
drm/amd/display: fix division by zero in get_estimated_bw()
drm/amd/display: use halving distribution for all encode-to-linear curves
drm/amd/display: Fix backlight control for luminance-capable OLED
drm/amd/display: Remove const Qualifier From Non-Pointer Fields
drm/amd/display: Set gpuvm min page size to 4K on dcn35/36
drm/amd/display: Fix DCN5/6 DML2 compilation warnings
drm/amdgpu: fix Idle BOs list in VM debugfs status info
drm/amdgpu: use AMDGPU_GPU_PAGE_SHIFT instead of PAGE_SHIFT
drm/amdgpu: Update queue reset support version
...
Pull arm64 fixes from Will Deacon:
"Nothing Earth-shattering, but worthwhile fixes nonetheless:
- Disable interrupts during page-table walk in show_pte()
- Fix kexec_file_load() with 52-bit capable kernels on machines
without 52-bit addressing
- Fix MIDR matching in CPU errata handling for KVM guests
- Avoid reading MTE-specific ID registers when MTE support is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Don't read GMID_EL1 when MTE is disabled
arm64: errata: pass REVIDR when matching target implementation CPUs
arm64: trans_pgd: clone only the linear map that exists at runtime
arm64: mm: Fix the lockless page-table walk in show_pte()
Pull ceph fixes from Ilya Dryomov:
"A small fixup for the new nearfull_sync mount option, a potential
use-after-free fix (marked for stable) and a patch that eliminates
the last use of PageWriteback macro in the tree"
* tag 'ceph-for-7.3-rc2' of https://github.com/ceph/ceph-client:
ceph: apply nearfull_sync option on remount
libceph: remove pinning assertion in ceph_msg_data_iter_next()
ceph: lock mutex in ceph_mds_check_access()
The IMA_MEASURE_PCR_IDX option is currently not visible in the kconfig
frontend, so it always uses its default, 10. This means that the
'range 8 14' is dead code, and users are unable to specify the pcr index
value.
In a previous discussion, Mimi explained that users should be able to use
this config option to specify the pcr index. [1]
Let's add a prompt for users to specify the pcr index, when EXPERT is
enabled.
This dead range was found by kconfirm, a static analysis tool for Kconfig.
Link: https://lore.kernel.org/all/1feff118-4afa-4b9c-86f1-271a7a88208f@gmail.com/T/#mc4efa2491b4937eb7c9e532c29ffba516a70e662 [1]
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull HID fixes from Benjamin Tissoires:
- hid-hyperv build fixes on certain configs (Jiri Kosina)
- HID-BPF fix and selftests now that the bpf verifier is more
restrictive (Benjamin Tissoires)
- Some AI detected fixes for OOB, errors and validation (Ibrahim
Hashimov, Shen Yongchao, Wei Jie Law)
- various device fixes (Dave Carey and Vadim Klishko)
* tag 'hid-for-linus-2026090401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: serialize device reference release in struct_ops destroy path
HID: rmi: fix OOB access with undersized RMI reports
selftests/hid: prepare test_rdesc_fixup_get_data_overflow for the new verifier
selftests/hid: Add a test to ensure we can write fields in hid_device
HID: bpf: mark struct hid_device as safe BPF pointer
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
HID: multitouch: Fix stale MT slots when contact count drops to zero
HID: i2c-hid: Add a quirk for a Cirque I2C device.
HID: hyperv: make pointer arithmetics understandable for FORTIFY_SOURCE
HID: hyperv: fix build breakage with certain configs
Pull sound fixes from Takashi Iwai:
"A collection of small fixes since 7.3-rc1.
Quite a few fixes are for ALSA core for issues that have been detected
by the things you know well. Additionally a series of hardening for
runtime PM, and usual quirk updates, and some other misc driver fixes
are included.
Core:
- Fixes for PCM races
- UMP parser NULL dereference fix
- Fix error handling in rawmidi ioctl
USB- and HD-audio:
- Implement missing runtime PM guards across multiple interfaces
- Fix for OOB access in US-122L MIDI driver
- Double-free fix for CAIAQ driver
- Quirks for HD-audio Realtek & Cirrus codecs, Conexant S3-resume,
USB Audient devices
Others:
- Fix of logical mistakes in dummy driver mixer and selftest code
- Lock init fix in the legacy harmony driver"
* tag 'sound-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: caiaq: Fix potential double-free at error path
selftests/alsa: Fix the step check for INTEGER controls
ALSA: hda/realtek: Fix cold-boot headset misdetection on Acer Aspire A515-57G
ALSA: rawmidi: Return the error from snd_rawmidi_input_params()
ALSA: ump: do not touch legacy_rmidi before it exists
ALSA: hda/cs420x: Add CS4208 fixup for MacBookAir 7,2
ALSA: dummy: Report a change when one capture switch channel moves
ALSA: usb-audio: Add mixer map quirk for Audient iD24
ALSA: hda: restore MFG widget enumeration after core split
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
ALSA: harmony: initialize locks before requesting IRQ
ALSA: hda/realtek: Add quirk for VAIO VJS131
ALSA: pcm: Fix race between non-atomic ops and trigger-start
ALSA: hda/realtek: Add quirk for Acer Predator PHN16-72
ALSA: hda/realtek: Add quirk for Lenovo Yoga Slim 9 14ILL10
ALSA: hda/conexant:Fix abnormal Mic/Speaker functionality on SN6140 after S3 wake-up
ALSA: usb-audio: Guard FCP protocol transfers
ALSA: usb-audio: Add PM guards to RME Digiface controls
ALSA: usb-audio: Guard Scarlett2 protocol transfers
...
Pull ata fixes from Niklas Cassel:
- Work around lost interrupts on Marvell 88SE61xx
The Marvell AHCI controller requires you to clear interrupts in the
opposite order from what is specified in the AHCI specification in
order to not lose interrupts (Hajo)
- Do not raise UNIT ATTENTION for depopulation commands
The libata completion function unconditionally sets sense data with
sense key UNIT ATTENTION (UA) for depopulation commands. The SCSI
layer will fail a command when seeing this sense data. UA is only
supposed to be raised if the capacity actually changed.
Since these commands are currently only supported as passthrough
commands, the user is expected to revalidate the device, which will
detect a capacity change anyway. Thus drop the unconditional UA until
a better solution has been implemented (Damien)
* tag 'ata-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: do not raise UA for storage element depopulation and restoration
ata: ahci: work around lost interrupts on Marvell 88SE61xx
Pull smb server fixes from Namjae Jeon:
- Fix a tree connection use-after-free in smb2_tree_connect() by
balancing references across concurrent connect, disconnect, and
session logoff paths.
- Validate source and target ranges in COPYCHUNK requests before range
locking and copy operations.
- Fix an oplock break notification UAF by acquiring a connection
reference under ksmbd_inode lock and releasing it after the
notification work completes.
- Fix the sparc build by using an unsigned int for the atomic work
state, ensuring xchg() uses a supported four-byte operation.
* tag 'ksmbd-for-7.3-rc2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/smb:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd: validate COPYCHUNK source and target ranges
ksmbd: fix use-after-free in oplock break notification
ksmbd: fix sparc build with atomic work state
Pull probes fixes from Masami Hiramatsu:
- Protect kprobe_blacklist with RCU
RCU-protect kprobe_blacklist and use kfree_rcu() to prevent UAF races
during module unloading and enable safe atomic lookups.
- Fix multi-probe field use-after-free
Duplicate field and type strings on trace_probe_event to prevent UAF
when freeing primary probe
- Fix probe BTF member lookup:
Check the containing inner struct/union kflag when resolving
anonymous members to ensure correct bitfield offset calculation
Prevent unnamed bitfields from being pushed to anon_stack in
btf_find_struct_member(), avoiding false lookup errors
Fix code block indentation in get_bitoffset_of_field()
- uprobes error pointer safety
Guard free_trace_uprobe() with IS_ERR_OR_NULL() to avoid crashing
during automatic cleanup when an error pointer is returned
* tag 'probes-fixes-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Protect kprobe_blacklist with RCU
tracing/probes: Fix use-after-free on field name/type of events with multiple probes
tracing/probes: Fix code indent in get_bitoffset_of_field()
tracing/probes: Fix BTF kflag check for anonymous struct member access
tracing/probes: Fix anon_stack check for unnamed bitfields in btf_find_struct_member
uprobes: guard trace cleanup against error pointers
Pull pmdomain and cpuidle fixes from Ulf Hansson:
"pmdomain providers:
- mediatek: Fix Kconfig for Airoha power domains
- qcom: Revert adding the missing power domains for Eliza
cpuidle:
- psci: Fix support for probe deferral by dropping the faux device
- dt_idle_genpd: Free the original name allocation"
* tag 'pmdomain-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
cpuidle: dt_idle_genpd: kfree() the original name allocation
pmdomain: airoha: fix unselectable AIROHA_CPU_PM_DOMAIN kconfig
cpuidle: psci: Fix support for probe deferral by dropping the faux device
Revert "pmdomain: qcom: rpmhpd: Add missing MXC and MMCX power domains for Eliza"
HWSPNLCK_TIMEOUT is passed to hwspin_lock_timeout_in_atomic(), whose
timeout argument is in milliseconds, not microseconds:
atomic_delay += HWSPINLOCK_RETRY_DELAY_US;
if (atomic_delay > to * 1000)
return -ETIMEDOUT;
So stm32mp_exti_set_type() asks for a 1 second timeout where the comment
next to the macro says it wants 1 millisecond. The semaphore is polled
with udelay() from a section that holds chip_data->rlock, a
raw_spinlock_t, so preemption stays disabled for the whole wait on every
configuration, PREEMPT_RT included.
The hwspinlock core documents this explicitly:
If the mode is HWLOCK_IN_ATOMIC (called from an atomic context) the
timeout is handled with busy-waiting delays, hence shall not exceed
few msecs.
Fixes: 5257169ade ("irqchip/stm32-exti: Use the hwspin_lock_timeout_in_atomic() API")
Signed-off-by: Ju Nan <junan76@163.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260821024756.24927-2-junan76@163.com
This reverts commit 6be6cba9c4.
Commit 6be6cba9c4 ("irqchip/mbigen: Fix mbigen node address layout")
appears to cause a regression on Hi1616.
On-board hns NIC has two ports, enahisic2i0 and enahisic2i1, both
behind mbigen-v2. Port 0 works; port 1 cannot pass any traffic.
Their interrupt pins fall on different mbigen nodes:
enahisic2i0: pins 1152-1198 -> all in node 9
enahisic2i1: pins 1200-1246 -> node 9 (1200-1215) + node 10 (1216-1246)
(nid = (hwirq - 64) / 128 + 1; pin 1215 = node 9, pin 1216 = node 10)
/proc/interrupts shows the break happens exactly at the node boundary:
enahisic2i1-rx0 pin 1200 count 102 <- node 9
enahisic2i1-rx5 pin 1215 count 1 <- node 9, last pin
enahisic2i1-tx5 pin 1216 count 0 <- node 10, first pin
enahisic2i1-rx6 pin 1218 count 0 <- node 10
...all node 10 pins stay at zero.
Port 0 (entirely node 9) is unaffected. Reverting the commit restores
normal operation.
The commit assumes CLEAR occupies a full 4 KB page at [0xa000, 0xb000)
and collides with node 10, so node 10+ gets shifted by 0x1000.
But get_mbigen_clear_reg() uses flat, chip-wide addressing -- it never
multiplies by the node ID:
*addr = (hwirq / 32) * 4 + REG_MBIGEN_CLEAR_OFFSET; /* 0xa000 */
Over the valid hwirq range [64, 1407], CLEAR only spans 0xa008-0xa0af
(168 bytes). Node 10's registers are:
TYPE: 0xa000-0xa00f (16 B) overlaps CLEAR by 8 B (0xa008-0xa00f)
VEC: 0xa200-0xa3ff (512 B) no overlap with CLEAR
Shifting the whole page moves VEC from 0xa200 to 0xb200. The hardware
reads the event ID from the fixed silicon address 0xa200 on interrupt
firing, but software wrote it to 0xb200 -- so the hardware gets an
uninitialised value and the interrupt is lost.
The only real overlap is 8 bytes of TYPE. It can only trigger when a
single mbigen instance has devices on both node 1 (CLEAR 0xa008) and
node 10 (TYPE 0xa008). On Hi1616 those nodes are on separate mbigen
instances, so it never triggers.
Fixes: 6be6cba9c4 ("irqchip/mbigen: Fix mbigen node address layout")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: caina <caina@uniontech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Yipeng Zou <zouyipeng@huawei.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260821091720.16665-1-caina@uniontech.com
In kvm_loongarch_cpucfg_set_attr() the check-then-set on
kvm->arch.pv_features is lockless, so two vCPUs can race past the
validation and set different values. Add a spinlock to protect it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as
the irq number. The MSI data comes from userspace, that either via a
KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd
and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked
against EIOINTC_IRQS.
eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the
256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and
the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value
>= 256 reads and writes memory past the end of those arrays, i.e. any
process holding a VM fd can corrupt kernel memory beyond the allocation
of loongarch_eiointc.
Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC
path is unaffected as it decodes the vector from the address and masks
it.
Cc: stable@vger.kernel.org
Fixes: 1928254c5c ("LoongArch: KVM: Add irqfd support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260531140921.1B1181F00893@smtp.kernel.org/
Reviewed-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_arch_prepare_memory_region() computes new->arch.flags, i.e. whether
a memslot is KVM_MEM_HUGEPAGE_CAPABLE or KVM_MEM_HUGEPAGE_INCAPABLE,
only for KVM_MR_CREATE and KVM_MR_MOVE, and returns early for every
other change. But the generic code allocates a zeroed memslot for every
change and never copies old->arch, so after a KVM_MR_FLAGS_ONLY update,
e.g. toggling KVM_MEM_LOG_DIRTY_PAGES for live migration, the active
memslot has arch.flags == 0.
With both flags clear, fault_supports_huge_mapping() falls through to
the alignment check on the HVA range alone, which no longer verifies
that the GPA and HVA have the same offset within a PMD. A memslot that
was marked KVM_MEM_HUGEPAGE_INCAPABLE because of a GPA/HVA offset
mismatch can then be mapped with PMD entries on read faults, and since
kvm_map_page() aligns the gfn and the pfn independently, the guest ends
up accessing the wrong host pages, exactly the "d -> f, e -> g" case
described in the comment above the check.
Carry the arch flags over from the old memslot for KVM_MR_FLAGS_ONLY,
as the GPA, HVA and size are guaranteed to be unchanged for that case.
Cc: stable@vger.kernel.org
Fixes: 7ab6fb505b ("LoongArch: KVM: Optimization for memslot hugepage checking")
Tested-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_loongarch_env_init() allocates the per-CPU kvm_context (vmcs) and
kvm_loongarch_ops, registers the perf callbacks, and then registers
the IPI/EIOINTC/PCH-PIC/DMSINTC KVM devices. If any of those device
registrations fails, the function returned the error directly, leaving
everything acquired so far in place: vmcs and kvm_loongarch_ops are
never freed, the perf callbacks stay registered, and all previously
registered KVM device operations remain registered. kvm_loongarch_init()
propagates the errors without calling kvm_loongarch_env_exit(), so
nothing else cleans up either.
Unwind the error path in reverse order of registration, so that each
failure only undoes what had actually been set up. Use the same helpers
in kvm_loongarch_env_exit() to remove the device registrations during
normal teardown as well.
Cc: stable@vger.kernel.org
Fixes: c532de5a67 ("LoongArch: KVM: Add IPI device support")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Chaithanya Lagisetty <nagachaithanya9911@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The IPI/EIOINTC/PCH-PIC/DMSINTC KVM devices each have a helper that
registers their kvm_device_ops, but there is no counterpart to remove
them, so a caller that needs to undo a registration has to open-code
kvm_unregister_device_ops() with the matching device type.
Add kvm_loongarch_unregister_{ipi,eiointc,pch_pic,dmsintc}_device()
next to the existing register helpers. kvm_unregister_device_ops() is a
no-op when the corresponding device type is not currently registered.
No functional change, as there are no callers yet.
Cc: stable@vger.kernel.org
Suggested-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Chaithanya Lagisetty <nagachaithanya9911@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_loongarch_init() calls kvm_loongarch_env_init() to allocate the
per-CPU kvm_context (vmcs) and kvm_loongarch_ops and to register the
perf callbacks, and then calls kvm_init(). If kvm_init() fails its
result is returned directly, but since module_init() does not run the
module_exit() stuff on failure, so kvm_loongarch_env_exit() is never
called and those resources are leaked.
So call kvm_loongarch_env_exit() when kvm_init() fails, matching the
teardown-on-failure pattern used by riscv_kvm_init().
Cc: stable@vger.kernel.org
Fixes: 2bd6ac6872 ("LoongArch: KVM: Implement kvm module related interface")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Chaithanya Lagisetty <nagachaithanya9911@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the LoongArch BPF JIT code, the branch offset represents the number
of instructions. An offset of 1 means the target of the "beq" is the
current PC plus 1 instruction (PC + 4 bytes). This matches the exact
same path as the sequential non-branch execution, the "or" instruction
is always executed for the cast_user JIT arm in build_insn().
If the pointer is not NULL, there is no side effect. But if the pointer
is NULL, it is incorrectly combined with the base address and turns into
a non-zero address, meaning a zero arena offset no longer casts to NULL.
Fix this by changing the branch offset from 1 to 2, which properly skips
the "or" instruction and jumps directly to the "move_reg" instruction if
the pointer is NULL, ensuring the destination register is safely cleared
to 0.
Cc: stable@vger.kernel.org
Fixes: 4fdb5dd8ae ("LoongArch: BPF: Implement bpf_addr_space_cast instruction")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch uses break 11 for the breakpoint placed after an instruction
that Kprobes executes out of line. Since userspace can issue the same
break instruction, do_bp() can reach kprobe_singlestep_handler() when
there is no current probe.
The handler actually returns false in this case, but it first calls
preempt_enable_no_resched(). The corresponding preempt_disable() is done
by kprobe_breakpoint_handler() on a real Kprobe hit, so it has not run
here. As a result, an ordinary userspace breakpoint (code 11) underflows
the current task's preempt count.
This also makes in_interrupt() return true until the task schedules. One
visible consequence is the socket cgroup attribution: cgroup_sk_alloc()
treats the allocation as interrupt context and assigns the socket to the
root cgroup. A socket opened from the SIGTRAP handler can then avoid a
BPF_CGROUP_INET_SOCK_CREATE policy attached to the task's own cgroup.
Return as soon as kprobe_running() reports no active probe.
The same check has appeared in [PATCH v10 2/4] of the original LoongArch
Kprobes series, but was dropped before the feature reached mainline.
Cc: stable@vger.kernel.org
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Link: https://lore.kernel.org/loongarch/1670575981-14389-3-git-send-email-yangtiezhu@loongson.cn/
Assisted-by: Codex:gpt-5
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The rethook trampoline saves $r21 ($u0), the percpu base, into its frame
at entry and restores it at exit. Inbetween rethook_trampoline_handler()
may schedule via preempt_enable_notrace().
If the task migrates to another CPU, the frame's $r21 holds the old
CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until
the next user->kernel transition heals $r21, all this_cpu_*() accesses
(runqueues, RCU per-CPU data, timer tick programming, FPU ownership)
hit the wrong CPU's percpu area.
Under kretprobe-heavy preemptible load this can corrupt scheduler and
timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings,
WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs
parking in the idle loop with the constant timer never re-armed (hard
lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths
plus heavy file churn (OS install / unsquashfs).
By convention $r21 always holds the current CPU's percpu base in kernel
mode: SAVE_SOME() at exception entry reloads it only when coming from
user mode, and RESTORE_SOME() restores it only when returning to user
mode; the context-switch path never writes it. Therefore the live $r21
at trampoline exit is already correct, and nothing inbetween can change
it legitimately (kernel C code cannot write a global register variable).
The same flaw existed even in the pre-rethook kretprobe trampoline since
v6.3; it was carried over when rethook replaced it. Drop both the save
and the restore here. Drop the restore is enough to solve the issue, and
drop the save is to keep the code tidy and no need to clear it.
Cc: stable@vger.kernel.org # v6.3+
Fixes: 3f55368600 ("LoongArch: Add kretprobes support")
Assisted-by: Kimi:Kimi-K3 # debug and root-cause analysis
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
setup_profiling_timer() is not used by any code at this point. Since a
default weak implementation exists, there is no need to still keep this
arch-specific definition around. Remove it along with the now-redundant
profile header includes.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Correct "avaliable" to "available", reported by scripts/checkpatch.pl
using the misspelling list in scripts/spelling.txt. It only touches the
comments, no code changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit 2625480a1b ("hardening: Default randstruct off with rust
for better allmodconfig support"), which allows Rust to be enabled for
allmodconfig, ARCH=loongarch allmodconfig starts failing with:
error: kernel-address sanitizer is not supported for this target
error: aborting due to 1 previous error
make[4]: *** [rust/Makefile:741: rust/core.o] Error 1
For the same reason as the commit 84a0f7caaf ("ARM: Do not select
HAVE_RUST when KASAN is enabled"), do not select HAVE_RUST when KASAN
is enabled until the loongarch64-unknown-none-softfloat target in rustc
supports KASAN.
Cc: stable@vger.kernel.org
Fixes: 90868ff9ca ("LoongArch: Enable initial Rust support")
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
drm/i915 fixes for v7.3-rc2:
- Drop an accidentally duplicated panel fitter call in DP MST
- Fix DDI clock programming for Cx0 and LT PHY
- Fix PTL CDCLK handling at probe, causing a glitch
- Fix dg2_power_well_count() return type
- Fix a NULL pointer deref at forced probe
- Fix selective fetch disable
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/affe11af9d5eb9dc6f906441495cb843f9d4817c@intel.com
A whole bunch of fixes for various drivers
- Fix drm_crtc_commit leak when PAGE_FLIP_EVENT is used,
- amd: plane blend mode fixes
- amdxdna: out-of-bounds access fix, reject commands chains with no
commands, handle chained mapping BO failures, refuse to flush an
imported BO
- atomic-state-helpers: set pixel_blend_mode to prop default on reset
- dma-buf: Publish the dma-buf only after copy_to_user succeeds, fix
some kernel-doc warnings
- ethosu: handle mmio mapping failures, handle storage modes only on
hardware that supports it, fix job completion fence cleanup
- fastrpc: Publish the dma-buf only after copy_to_user succeeds
- gud: Improve TV modes and rotation handling
- nouveau: use-after-free fixes, add scanline position support, HDMI
and DP fixes, null pointer dereference fix, dmem accounting fixes for
large folios, use write-combined maps for coherent
- pagemap: Prevent double migration of device pages, Reset migration
page count on eviction retry, dma-unmap pages before handling
migration errors, use after free fixes
- prime: fix prime exports tracing
- qaic: out-of-bounds access fix
- sysfb: Fix integer overflow, fix constant comparison bug
- tegra: Add blend mode properties
- virtio: exit path and error handling fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/apk9X5SkRLS9g4RF@houat
Pull NVMe fixes from Keith:
"- Harden the tcp host and target against malformed PDUs: reject C2HData
for a non-read command, bound an over-long PDU before copying it, and
reject unsolicited H2CData (Yehyeong, Shivam)
- Fix circular locking on TLS queues (Xixin)
- Fix a soft lockup when scanning sparse namespace ID space (Mohamed)
- Fix racy access to the FDP placement id array (Kanchan)
- RDMA host and target fixes for a double cleanup on the queue_rq
error path and a queue leak when the connect backlog is exceeded
(Xixin)
- Authentication fixes: drain the target's expiry work before the SQ
is freed, and release the DH-CHAP secret when parsing fails (Kazuki,
Xu Rao)
- Fix nvme-fc options double free when nvme_add_ctrl() fails (Niklas)
- Add missing SRCU grace period to nvme_alloc_ns() error path (Tristan)
- Skip zoned limits update when the zone info query failed (Chao)
- Reject enabling a target namespace with no device path (Seokgyu)
- Add opcode filtering for fault injection (Mohamed)
- Drop the kernel-doc comments from nvme-tcp.h (Randy)"
* tag 'nvme-7.3-2026-09-03' of git://git.infradead.org/nvme: (21 commits)
nvme-tcp.h: drop kernel-doc comments, fix a few descriptions
nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails
nvmet: reject namespace enable without device path
nvmet-auth: Synchronize timeout work during SQ teardown
MAINTAINERS: update nvme entry
nvmet-tcp: reject unsolicited H2CData PDUs
nvme-tcp: defer TLS inline send to io_work
nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU
nvme-tcp: return -EPROTO for a C2HData on a write
nvmet: print namespace IDs as unsigned 32bit value
nvme: print namespace IDs as unsigned 32bit value
nvme: remove stale namespaces by NSID range during scan
nvme: add missing SRCU grace period in error path
nvme-fabrics: fix DHCHAP secret leak on parse failure
nvmet-rdma: fix queue leak when connect backlog is exceeded
nvme: add opcode filtering for fault injection
nvme: fix racy access to FDP placement id array
nvme: set ns->head in nvme_alloc_ns_head
nvme-rdma: fix -EIO cleanup order in queue_rq
nvme: skip the zoned limits update if the zone info query failed
...
Pull misc fixes from Andrew Morton:
"18 hotfixes. 13 are cc:stable. 15 are for MM.
All are singletons - please see the changelogs for details.
There are no fixes (yet) for all the stuff we added in the most recent
merge window. Hopefully a good sign"
* tag 'mm-hotfixes-stable-2026-09-03-17-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/secretmem: properly account locked pages
mm/mremap: reset unfaulted VMA page offset for MREMAP_DONTUNMAP
MAINTAINERS: add Kiryl as a THP reviewer
MAINTAINERS: cover all of RAID
MAINTAINERS: mailmap: update entries for Thorsten Blum
MAINTAINERS: remove Lorenzo as THP co-maintainer
Revert "once: don't use a work queue to reset sleepable static key"
mm/hugetlb: fix missing migratable flag on same-node hugetlb migration
mm/mempolicy: fix sleeping allocation in alloc_pages_bulk_weighted_interleave()
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
MAINTAINERS: add Lance Yang as a hung task detector co-maintainer
userfaultfd: reset err to be 0 when move_pages_ptes succeeded
mm: fix incorrect vm_flags usage when checking allowable orders for tmpfs
mm/hugetlb: keep max_huge_pages when dissolving surplus folios
mm/migrate_device: avoid out-of-bounds writes for compound folios
mm/hugetlb_cgroup: call page_counter_set_max() outside VM_BUG_ON()
memcg: make the v1 soft limit knob inert
mm/hugetlb_cma: fix null nodemask dereference in hugetlb_cma_alloc_frozen_folio
Expand @fei into @feil and @feih because the field was split due to it
not being 32-bit aligned.
Struct member @hdr was described twice in struct nvme_tcp_rsp_pdu, so
drop one of them.
These structs are defined in a spec outside of the kernel, so kernel-doc
comments for them aren't needed here as well.
This avoids kernel-doc warnings:
Warning: include/linux/nvme-tcp.h:95 struct member 'rsvd2' not described in 'nvme_tcp_icreq_pdu'
Warning: include/linux/nvme-tcp.h:113 struct member 'rsvd' not described in 'nvme_tcp_icresp_pdu'
Warning: include/linux/nvme-tcp.h:128 struct member 'feil' not described in 'nvme_tcp_term_pdu'
Warning: include/linux/nvme-tcp.h:128 struct member 'feiu' not described in 'nvme_tcp_term_pdu'
Warning: include/linux/nvme-tcp.h:128 struct member 'rsvd' not described in 'nvme_tcp_term_pdu'
Warning: include/linux/nvme-tcp.h:169 struct member 'rsvd' not described in 'nvme_tcp_r2t_pdu'
Warning: include/linux/nvme-tcp.h:187 struct member 'rsvd' not described in 'nvme_tcp_data_pdu'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvmf_create_ctrl() owns the fabrics options and frees them whenever
->create_ctrl() returns an error, so a transport must not free them on
its own error paths. nvme-fc tracks this by testing ctrl->ctrl.opts in
nvme_fc_ctrl_free(), which requires nvme_fc_init_ctrl() to clear that
pointer on every error exit.
The coupling is implicit, and commit 1a9e218195 ("nvme: split device
add from initialization") broke it by adding a second error exit. When
nvme_add_ctrl() fails, nvme_fc_init_ctrl() jumps to out_put_ctrl:, past
the "ctrl->ctrl.opts = NULL" that only sits on the fail_ctrl: path, so
nvme_fc_ctrl_free() frees the options and nvmf_create_ctrl() frees them
a second time:
BUG: KASAN: slab-use-after-free in nvmf_free_options+0x30/0x190
nvmf_free_options+0x30/0x190 drivers/nvme/host/fabrics.c:1284
nvmf_create_ctrl drivers/nvme/host/fabrics.c:1374 [inline]
Freed by task 5534:
nvme_fc_ctrl_free drivers/nvme/host/fc.c:2374 [inline]
nvme_fc_init_ctrl+0xe17/0x1450 drivers/nvme/host/fc.c:3605
nvme_add_ctrl() fails when dev_set_name() cannot allocate, so this is
reachable under memory pressure or fault injection. Without KASAN the
options are freed twice.
Rather than clear the pointer on the second exit as well, derive
ownership the way nvme-tcp, nvme-rdma and nvme-loop do, from list
membership: their free_ctrl leaves the options alone unless the
controller made it onto the transport list.
The list cannot simply be populated on the success path as it is there.
nvme-fc runs the initial connect synchronously via flush_delayed_work(),
and the controller has to be reachable on rport->ctrl_list for the whole
of it: nvme_fc_unregister_remoteport() needs to find it to signal
connectivity loss, nvme_fc_match_disconn_ls() matches an incoming
Disconnect Association LS against ctrl->association_id, which is only
assigned during that window, nvme_fc_resume_controller() needs it on
remoteport re-registration, and nvme_fc_existing_controller() uses it to
reject a duplicate connect racing the one in flight.
Keep the insertion where it is and add a fail_unlist: label, falling
into fail_ctrl:, for the error paths that run after it. The earlier
error paths never reach the insertion and keep using fail_ctrl:
directly, so the list is only touched where the controller is actually
on it.
nvme_fc_ctrl_free() cannot use the plain "goto free_ctrl" the other
transports use, because it still has to put_device(), release the rport
reference and free the ida entry for resources taken before the
insertion. Sample list_empty() under rport->lock instead.
ctrl->ctrl.opts also stays valid for the whole teardown now. That is
not the bug being fixed, but it removes some fragility around the old
idiom: nvme_free_ctrl() calls nvme_auth_free() before ->free_ctrl(), and
ctrl_max_dhchaps() dereferences ctrl->opts without a NULL check when
ctrl->dhchap_ctxs is set, which nvme-fc permits since NVMF_ALLOWED_OPTS
allows the dhchap options. The nvme sysfs attributes that dereference
ctrl->opts, such as hostnqn and address, evaluate their is_visible()
test once at device_add() time and stay readable until
cdev_device_del().
Fixes: 1a9e218195 ("nvme: split device add from initialization")
Cc: stable@vger.kernel.org
Reported-by: syzbot+f58e57380a6083c4041d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f58e57380a6083c4041d
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Rihyeon Kim <rihyeon8648@gmail.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A newly allocated namespace has a NULL device_path until userspace
configures the device_path attribute.
If buffered_io is enabled before device_path is configured,
nvmet_bdev_ns_enable() returns -ENOTBLK and nvmet_ns_enable() falls
back to nvmet_file_ns_enable(). The latter passes the NULL
device_path to filp_open(), causing a NULL pointer dereference in
getname_kernel().
Reject namespace enable when device_path has not been configured.
Reported-by: syzbot+f613f9f010ec98eb9d86@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f613f9f010ec98eb9d86
Signed-off-by: Seokgyu Choi <tjrrb0313@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Linus Torvalds